battery

18V (Lithium-ion battery 3.0Ah)

Charging time

Practical charging: about 40 minutes
Full charge: about 55 minutes

Chuck ability

1.5-13mm

number of revolutions

Low speed: 20 to 530 revolutions/minute
High speed: 70 to 1800 revolutions/minute

number of blows

Low speed: 400 to 9,500 times/minute
High speed: 1,260-32,300 times/minute

striking power

about 2kN

Vibration 3-axis composite value

11.2m/s2

Maximum torque

Rigid body tightening torque: 50N・m
Low speed: 32N・m
High speed: 12N・m

ability

Mortar: ~φ13mm, siding: φ80mm, metalworking hole saw: φ33mm, metalworking: φ13mm, woodworking: ~φ38mm, wood thread: ~8mm, tex: ~6mm

The amount of work per charge

Drilling
・Low speed
Holso SPC (φ33×1.6mm) about 30 holes
・High speed
Holso SPC (φ21×1.6mm) about 25 holes
Woodworking, Yonematsu (φ21×120mm) about 90 holes
Wooding core drill (φ65 x ceramic siding material 16mm + plywood 12mm) about 30 holes
Mortar (φ6.5 x depth 30mm) about 100 holes

Screw tightening
・High speed
About 950 wood screws and Yonematsu (φ4.1×25mm)
About 370 Tex screws and SPC (φ4×13mm, plate thickness 1.6mm)

Dust-proof and water-resistant performance

IP56

size

192×68×238(H)mm

Weight

about 1.8kg

Accessories

2 batteries, charger, resin case

Speed control function, forward reversal, brake, LED light, 18-stage clutch, hand tightening function

brushless motor

Bits sold separately

charger

AC100V