Hioki Electric (HIOKI) Product number:EA708AB-19A Product name: Clamp meter (AC only, digital)
Hioki Electric (HIOKI)
Product number:EA708AB-19A
Product name: Clamp meter (AC only, digital)
Specification
manufacturer | Hioki Electric (HIOKI) | model number | CM4141-90 |
AC voltage | 6/60/600/1000V (15-1kHz, true effective value rectification) | direct current voltage | 600mV/6V/60V/600V/1000V |
AC current | 60/600/2000A, (45 to 1kHz, true effective value rectification) | AC + DC voltage | 6/60/600/1000V (15-1kHz, true effective value rectification) |
Frequency | 9.999/99.99/999.9Hz (voltage frequency) | Resistance | 600/6k/60k/600kΩ/6MΩ |
Capacitance | 1μ/10μ/100μ/1000μF | temperature | -40~400℃ |
Function | Conductus check, diode check, AC/DC automatic discrimination function (voltage only), display of maximum, minimum, average, wave height maximum and minimum values, low-pass filter function, display value hold, auto hold, backlight, auto power save , buzzer sound | Clamp inner diameter | 55mm |
Power supply | 2 AAA batteries (included) | size | 65 (W) x 35 (D) x 247 (H) mm |
Joe cross-section minimum dimensions | 11mm | Joe dimensions | 82 (W) x 11 (D) mm |
Weight | 300g | Material | Resin |
Continuous use time | 24 hours (backlight OFF, BluetoothR ON) | Operating temperature range | -25℃~65℃ |
Crest factor | 60.00A range: 2.5 (over 50.00A and below 60.00A) to 2000A range: 1.5 (2000A or less) | Dustproof and waterproof | IP20 (current measurement of voltage or dangerous active conductor in a completely dry state) |
bluetooth | 有 | Communication interface | GENNECT Cross (free download app): Display of measured values and waveforms, simple logging function, waveform monitor function, hold save function |
Accessories | Test lead x 1, portable case x 1, AAA alkaline battery (LR03) x 2, instruction manual x 1, precautions for use x 1, precautions for radio wave use x 1 |