PACE MBT250-SDTP SMT/Thru-Hole Rework System
2024-01-30 12:22:43
admin
PACE
MBT250-SDTP SMT/Thru-Hole Rework System
Power Requirements | 115VAC, 60Hz, 230VAC, 50/60Hz, 184 Watts maximum 207 Watts maximum |
Handpiece Specs | SensaTemp Only |
Tip to ground resistance | 2 ohms or less |
Tempersture stability | 1.1°C (° 2°F) at idle from set tip temp. |
Tip Temperature Range | 38° to 482°C (100° to 900°F) nominal |
Vaccuum Rise Time | Evacuates 33cc (2 cubic inch) volume to 25cmHg. (10in Hg.) in 150ms. |
Pressure | .48 Bar (7 p.s.i.) nominal at maximum setting |
Airflow | 9 SLPM (0.32 SCFM) maximum |
