MALCOM TABLE TOP MODULE REFLOW OVEN(RDT-250C)

Model Name

RDT-250C

Applicable Circuit Board

Up to 250W x 330L x 15H mm

Outer Dimension

830(W)×557(D)×523(H)(mm)

Heating Method

Upper-face : Extreme infrared radiation with hot air 
Lower-face : Extreme infrared radiation

Cooling Method

Exhaust damper continuous operation by flowing air or N2 air 
(with flow adjustable valve)

Power Supply

200V 50/60Hz 18kVA 3Phase

Air

0.3 - 0.5MPa 100 liter/min (Maximum)

O₂ Concentration in Furnace 
(when using N₂)

100ppm minimum

PCB Installation

Net system or Carrier system (Selectable on request)

Upper-Heater

Extreme infrared radiation with hot air heater : 7.2kW (Approx.240W x 30 block) * Adjustments can be made using the Matrix control system Hot air heater : 8kW (2kW x 4)

Lower-Heater

Extreme infrared radiation heater : Approx. 2kW (330W x 6)

Temp. Accuracy

Room temp. - 80C : +/-3C 80C - 330C : +/-2C

Measuring Temp. Range

Room temp. - 330C

Measuring Points

1 - 6 points

N₂ Gas Supply Function

100 liter/min. with flow regulating valve during operation.

Control

Exclusive softwarefor Windows XP/2000

Weight

Approx. 110kg