Model

(add "C" after the model for economy,  please consult relevant sales personnel for details.
The relay module control signal can be set as an NPN and PNP, specific methods please consult sales

Contact
Specification

Contact Constitutive

1C

Contact Resistance (initial)

100m Ω
( By DC 6V 1A voltage descent method)

Contact Material

AgSnO₂

Rated

The rated control capacity (resistance load)

10A 250V AC,10A 30V DC

Contact maximum allowable voltage

250V AC,30V DC

Electrical performance

Insulation resistance (initial)

More than 1000 M Ω (DC 500v insulation resistance meter, is used to measure the resistance and voltage the same position)
 

On the coil temperature rise(at 70°C)

Under 60°C (resistance method, applying the rated operating voltage, in allowable electric contact)
 

Actuation Time

Under 15 ms (Applying the rated working voltage, do not contain contact bounce)
 

Resetting Time
 

Under 20 ms(Applying the rated working voltage, do not contain contact bounce, diode)
 

Life time
 

Mechanical Life
 

AC: more than 10 million DC: more than 20 million times (on-off frequency 300 times/min)

Electrical life (under the rated control capacity)
 

More than 100,000 times (on-off frequency 20 times/min)

Service Conditions

The largest operating frequency

20 times/min (under the rated control capacity)

Input

Relay Coil Specifications

 Nominal coil voltage 

DC 24V

 Nominal operating current

22.1mA

Coil resistance

1080 Ω

Pick-up Voltage

More 70%

Drop-out Voltage

Following 10%

Max. allowable voltage

170%

Nominal operating power

0.53MW