SIRON Y414 IC Contact Point Relay Corresponding to All Terminal Wiring PLC Output Modules
SIRON
Y414 IC Contact Point Relay Corresponding to All Terminal Wiring PLC Output Modules
Model | Y414 Y414-P Y414-C Y414-P-C | ||||
Suitable wire | 1.5mm2Following /AWG16 | ||||
Input | Relay Coil Specifications | ||||
Nominal coil voltage | DC 24V | ||||
Nominal operating current | 16.7mA | ||||
Coil resistance | 1400 Ω | ||||
Pick-up Voltage | More 80% | ||||
Drop-out Voltage | Following 5% | ||||
Max. allowable voltage | 130% | ||||
Nominal operating power | 400MW | ||||
Output | Switch Circuit | ||||
Contact Specifications | Arrangement | 1a/1b | |||
Initial contact resistance | 100m Ω(Voltage drop through the DC6V1AFrance ) | ||||
Nominal switching capacity (resistive load) | No side 5A 250V AC, 2A 250V AC ,3A 30V DC; | ||||
Max. switching power(resistive load) | NO.625VA ,90W | ||||
Max. switching voltage | NO.5A ; NC.2A | ||||
Max. switching capacity | 250V AC ; 110V DC | ||||
Min. switching capacity | DC 100mv 100uA | ||||
COM | Max. switching capacity | 5A | |||
Expected Life | Mechanical | More than 10 million times(Off frequency of 180 times/min) | |||
| 100,000 times or more(3A 250AC,30VDC,Resistive load) | ||||
Corresponding output Devices | Solenoid, Warning Light, Relay or Contactor |