SIRON Black IDC 8p Male Connector to 8p Terminal Block Breakout IDC 10p Adapter PLC Relay Module DIN Rail Mounting
SIRON
Black IDC 8p Male Connector to 8p Terminal Block Breakout IDC 10p Adapter PLC Relay Module DIN Rail Mounting
Input | Operating coil (every point of the relay) | |
Rated voltage | DC 24V | |
Rated current | 7.5MA | |
Coil resistance | 3200Ω | |
Action voltage | More 70% | |
Reset voltage | Following 5% | |
Maximum allowable voltage | 120% | |
Rated consumption power | 180MW | |
Output | Switch part (each point of the relay) | ||
Contact specifications | Contact structure | 1A | |
Contact resistance (initial) | 30mΩ(Voltage drop throgh the DC6V1A France) | ||
Rated control capacity (resistive load) | 5A 250V AC ,5A 30V DC | ||
Maximum allowable power | 1250VA, 150W | ||
Maximum allowable current | 5A | ||
Maximum allowable voltage | 250V AV;110V DC | ||
Minimum applicable load | DC 100MV 100UA | ||
COM side | Maximum allowable current | 5A | |
Life | Mechanical lifetime | More than 20 million times (Off frequecy of 180 times/min | |
Electrical life | 100, 000 times or more (3A 250AC,30VDC ,Resistive load) | ||
Output side correspondence | Solenoid,Warning Light,Relay or Contactor. | ||
