ZHIXIN ZX1373 series bridge bias all-in-one machine
ZHIXIN
ZX1373 series
bridge bias all-in-one machine
Technical parameters | ||
Model | ZX1373 | |
Show | 7" LCD | |
Operation | Physical button + foot control switch | |
Support measurement frequency | 0Hz-500kHz | |
Current range | 0-12A | |
Current | Measure range | 0mA-1.000A, 1.000A-5.000A, 5.0A-12A |
Step by step | 0.25mA, 1.25mA, 6.25mA | |
Scanning adjustment time | 4ms-3600s | |
Maximum output voltage | 11V (11V voltage can be output under all current conditions) | |
Maximum allowable DC resistance | Rmax=Vmax/I (Ω) (Please refer to the user manual for the calculation of Rmax) | |
Maximum allowable inductance | Lmax=Vmax/(di/dt) (mH) (Please refer to the user manual for the calculation of Lmax) | |
Measurement method | Automatic | |
Start and stop control mode | START/STOP physical buttons, 4 kinds of foot control, bus | |
Maximum current time for continuous loading | Conservative 2-3h, uninterrupted output | |
Function | Instrument fault self-test; 99 sets of custom file management; dual progress bar instructions; Chinese and English bilingual; slave soft switch; real-time operation; SCPI instruction set; simple dual-display calculator, etc. | |
Interface | RS232C, UsbHost, USB Device, Handler | |
Power supply requirements | Voltage: 100～120 Vac or 198～242 Vac | |
Frequency: 46-64 Hz, power greater than 50 VA | ||
Temperature and humidity | 0℃～40℃, relative humidity ≤75% | |
Volume (WxHxD) | 465mmx395mmx135mm | |
Weight (net weight) | 9.9Kg | |
Technical parameters | ||
Model | Functional parameters of ZX1373 bridge | |
Test frequency | 50Hz～200kHz, More than 12,000 frequency points | |
Test parameters | C, L, X, B, R, G, D, Q, ESR, Rp, θ, |Z|,|Y|,P | |
Test level | 10mV-2Vrms | |
Basic accuracy | 0.05% accuracy table shall prevail | |
Test speed | Fast: 50 times per second, medium speed 20 times per second, slow speed 6 times per second (Frequency above 1kHz) | |
Show show Fan Encirclement | |Z|, R, X | 0.01 mΩ ~ 99.9999MΩ |
|Y|, G, B | 0.00001μS～99.9999S | |
C | 0.00001pF～9.99999F | |
D | 0.00001～9.99999 | |
DCR | 0.01mΩ～99.9999MΩ | |
L | 0.00001μH～99999.9H | |
Q | Q0.01～99999.9 | |
θ(RAD) | -3.14159～3.14159 | |
θ(DEG) | -179.999°～179.999° | |
Δ% | -99.999%~99.999% | |
Signal source output impedance | 30Ω, 100Ω, 10/CC | |
Measurement method | Automatic, maintain | |
Trigger mode | Internal, manual, automatic, external, bus | |
Calibration function | Open/short circuit, full frequency zero, point frequency zero | |
Equivalent circuit | Series, parallel connection | |
Comparator | Three-level sorting, BIN0～BIN2 | |
PASS, HI, LOW (PASS/FAIL LED display) | ||
