ZHIXIN ZX1378X150A Inductor DC Bias Current Source Test System
ZHIXIN
ZX1378X150A
Inductor DC Bias Current Source Test System
Technical parameters | ||||
Model | ZX1378M | ZX1378MX | ZX1378S | |
Show | 4.3" LCD | 4.3" LCD | LED indicator light | |
Operation | Physical button + foot control switch | Physical button + foot control switch | Controlled by the host | |
Support measurement frequency | 0Hz-2MHz | |||
Current range | 0-25A | 0-25A | Single 25A, can be superimposed 8 units, a total of 225A | |
Current | Measure range | 0mA-1.000A | 1.000A-5.000A | 5.0A-225A |
Step by step | 0.25mA | 1.25mA | 6.25mA*N (number of online units) | |
Scanning adjustment time | 4ms-3600s | 10ms-3600s | 20ms-3600s | |
Maximum output voltage | 11V (11V voltage can be output under all current conditions!!!) | |||
Maximum allowable DC resistance | Rmax=Vmax/I (Ω) (Please refer to the user manual for the calculation of Rmax) | |||
Maximum allowable inductance | Lmax=Vmax/(di/dt) (mH) (Please refer to the user manual for the calculation of Lmax) | |||
Measurement method | Automatic | |||
Start and stop control mode | START/STOP physical buttons, 4 kinds of foot control, bus | |||
Maximum current time for continuous loading | Conservative 2-3h, uninterrupted output | |||
Function | Instrument fault self-inspection; 99 sets of custom file management; Chinese and English bilingual; SCPI instruction set | |||
Interface | RS232, SlaverLink | SlaverLink | ||
Volume (WxHxD) | 430mmx178mmx465mm | |||
Weight (net weight) | 19kg | |||
Model | ZX1378X150A Bridge Functional Parameters | |
Test frequency | 50Hz~200kHz, more than 12,000 frequency points | |
Test parameters | C, L, X, B, R, G, D, Q, ESR, Rp, θ, |Z|, |Y|, P | |
Test level | 10mV-2Vrms | |
Basic accuracy | 0.05% accuracy table shall prevail | |
Test speed | Fast: 50 times per second, medium speed 20 times per second, slow speed 6 times per second (frequency above 1kHz) | |
Show show Fan Encirclement | |Z|, R, X | 0.01 mΩ ~ 99.9999MΩ |
|Y|, G, B | 0.00001μS～99.9999S | |
C | 0.00001pF～9.99999F | |
D | 0.00001～9.99999 | |
DCR | 0.01mΩ～99.9999MΩ | |
L | 0.00001μH～99999.9H | |
Q | 0.01～99999.9 | |
θ(RAD) | -3.14159～3.14159 | |
θ(DEG) | -179.999 °～179.999° | |
Δ% | -99.999%~99.999% | |
Signal source output impedance | 30Ω, 100Ω, 10/CC | |
Measurement method | Automatic, maintain | |
Trigger mode | Internal, manual, automatic, external, bus | |
Calibration function | Open/short circuit, full frequency zero, point frequency zero | |
Equivalent circuit | Series, parallel connection | |
Comparator | Three-level sorting, BIN0～BIN2 | |
PASS, HI, LOW (PASS/FAIL LED display) | ||
