UHT 2Head 2Stage Laser Puncher LP-2SD series

Work

Material

Ceramic green sheet (with or without PET film)

Punching area

Max. □220 mm (rectangle also available)

Punching area Size, Thickness

Max. □230 mm (rectangle also available); Max. 0.5 mm

Processing

Hole size

φ70～200μm

φ50～150μm

Mask change type (dependent on material, thickness, parameters)

Method

Mask imaging (Max. 12 masks can be set.)

Table

Suction table × 2

Capability

Punching accuracy

±20μm(Image processing accuracy is included.)

Galvo processing speed

2000PPS×2 heads (X axis 0.5mm pitch)

Laser unit

Oscillator

RF excitation CO2 laser

Wave length

10.6μm

9.4μm

10.6μm

9.4μm

Average output

over 400W

over 300W

over 400W

over 300W

Cooling method

Water-cooled by special chiller set outside machine

Optical unit

Number of processing heads

2 head

Method

Digital galvanometer optical scanning system

Scanning area

Max.□50mm

Max.□30mm

Laser focus adjustment

Electric(Set by software)

Z axis

Method

Automatic focus adjustment of optical unit by work thickness setting

Image processing

Method

CCD cameras detect alignment marks on sheet surface.

Detection method

Binary centroid calculation / pattern matching

Image processing camera

2 × 2 sets

Camera view

Narrow view:1.2×0.9mm　Wide view:4.8×3.6mm

Lighting

LED ring lighting　(standard: red, OP:white,blue,green)

Control

Control unit

UHT original controller

Operation

6.5inch color touch panel

Data editing

Dedicated software (on stand-alone PC)

Data memory capacity

Max. 100,000 positions per file

Network

Transmission of processing data from PC to machine via LAN.
Up to 4 machines are manageable from PC.

Dust collector(set outside machine)

From above/below workpieces and inside the machine by dedicated dust collector

Dust proof measures

Air purge system inside optical unit, fθ lens protective glass, axis covers

Safety device

Safety cover, Key switch, Safety interlock

Laser display light

2 colors of LED

Laser class

Class-1 laser product in compliance with JIS

Power source

3φ AC200V ±10% 14kVA

Air source

0.4～0.7MPa(Clean air)

Automation module

ST-DT(Stack loader)

Machine

Size

W2300×D1600×H1400mm

Weight

Approx. 2700kg

Working condition

Temperature

10～35℃(22±2℃ recommended)

Humidity

40～60%(Non-dewing)

Vibration

There must be neither impact nor a vibration.