UHT Laser Router LR-S2 12×20 series FPC, resin film
UHT
Laser Router
LR-S2 12×20 series
FPC, resin film
Model name | LR-S2 12×20 | ||
Work | Material | FPC and resin film | |
Size | Max.W520×D320, t1.0mm | ||
Machining area | Max.W500×D300mm | ||
Machining | Width | 15～30μm(spot size)(Varies according to machining conditions such as workpiece material and thickness) | |
Shape | Linear, arc, circular, spline (free curve), filling | ||
Table | On the adsorption table | ||
Capability | Machining accuracy | ±15μm(incl. image processing accuracy) | |
Machining speed | Max.500mm/s(Varies according to machining conditions such as workpiece material and thickness) | ||
Laser unit | Oscillator | Fully solid UV laser | |
Wave length | 355nm | ||
Average output | 10W(laser emission point) | ||
Cooling method | Water cooling with special chiller installed outside machine | ||
Optical unit | Method | Optical system of scanning(galvanometer type optical scanner method） | |
Scanning area | Max.□50mm | ||
Laser focus adjustment | Electric | ||
Optical system of observation | Observation of the same axis as the laser beam, manual focus type | ||
Z axis | Automatic focus adjustment of optical unit by work thickness setting | ||
Image processing | Method | Center of gravity measurement through digitization, pattern matching | |
Image processing camera | 2 units | ||
Camera view | Narrow field 1.3×1.0mm, Wide field 7.4×5.5mm | ||
Lighting | LED link light (Standard: red. OP: white, blue or green upon selection) | ||
Control | Control unit | Special controller made by UHT | |
Operation | Operated by 10.4 inch color liquid crystal touch panel | ||
Data editing | By interactive software on PC (Separation from main body) | ||
Network | Transmission of machining data from PC to the machine through LAN, centralized monitoring of the machine (up to 4 units on PC) | ||
Dust collector(set outside machine) | From the upper lower side | ||
Dust proof measures | Air purging type in optical unit, protection glass for fθ lens, each axis cover, and dustproof protection with bellows | ||
Safety device | Safety cover, Key switch, Safety interlock | ||
Laser display light | 2 colors of LED | ||
Laser class | Class-1 laser product in compliance with JIS | ||
Power source | 3φ AC200V ±10% 3.5kVA | ||
Air source | 0.4～0.7MPa(Clean air) | ||
Workpiece supply | Standard: manual feed (OP. automated) | ||
Machine | Size | W1500mm×D1400mm×H1550mm | |
Weight | Approx. 1800kg | ||
Working condition | Temperature | 10～35℃(22±2℃ recommended) | |
Humidity | 40～60%(Non-dewing) | ||
Vibration | There must be neither impact nor a vibration. | ||
