OMRON E5CD-RX2A6M-000 E5CD-RX2D6M-000 E5CD-RX2A6M-001 E5CD-RX2D6M-001 E5CD-RX2A6M-002 E5CD-RX2D6M-002 E5CD-QX2A6M-000 E5CD-QX2D6M-000 E5CD-QX2A6M-001 E5CD-QX2D6M-001 E5CD-QX2A6M-002 E5CD-QX2D6M-002 E5

Operating voltage range

85% to 110% of rated supply voltage

Power consumption

Models with option selection of 000:5.2 VA max. at 100 to 240 VAC, and 3.1 VA max. at 24 VAC or 1.6 W max. at 24 VDC 
All other models: 6.5 VA max. at 100 to 240 VAC, and 4.1 VA max. at 24 VAC or 2.3 W max. at 24 VDC

Sensor input

Temperature input 
Thermocouple: K, J, T, E, L, U, N, R, S, B, C/W, or PL II 
Platinum resistance thermometer: Pt100 or JPt100 
Infrared temperature sensor (ES1B): 10 to 70°C, 60 to 120°C, 115 to 165°C, or 140 to 260°C 
Analog input 
Current input:4 to 20 mA or 0 to 20 mA 
Voltage input:1 to 5 V, 0 to 5 V, or 0 to 10 V

Input impedance

Current input: 150 Ω max., Voltage input: 1 MΩ min. 
(Use a 1:1 connection when connecting the ES2-HB-N/THB-N.)

Control method

ON/OFF control or 2-PID control (with auto-tuning)

Control 
output

Relay output

SPST-NO, 250 VAC, 3 A (resistive load), electrical life: 100,000 operations, minimum applicable load: 5 V, 10 mA (reference value)

Voltage output 
(for driving SSR)

Output voltage: 12 VDC ±20% (PNP), max. load current: 21 mA, with short-circuit protection circuit

Linear current 
output

4 to 20 or 0 to 20 mA DC, Load: 500 Ω max., Resolution: Approx. 10,000

Auxiliary
output

Number of 
outputs

2

Output 
specifications

SPST-NO relay outputs: 250 VAC, E5CD: 3 A (resistive load), E5CD-B: 2 A (resistive load) 
Electrical life: 100,000 operations, Minimum applicable load: 10 mA at 5 V (reference values)

Event 
input

Number of 
inputs

2

External 
contact 
input 
specifications

Contact input: ON: 1 kΩ max., OFF: 100 kΩ min.

Non-contact input: ON: Residual voltage: 1.5 V max., OFF: Leakage current: 0.1 mA max.

Current flow: Approx. 7 mA per contact

Transfer 
Output

Number of 
outputs

1 (depends on model): Transfer output type

Output 
specifications

Current output: 4 to 20 mA DC, Load: 500 Ω, Resolution: Approx. 10,000 
Linear voltage output: 1 to 5 V DC, Load: 1 kΩ min., Resolution: Approx. 10,000

Setting method

Digital setting using front panel keys

Indication method

11-segment digital display, individual indicators, and bar display 
Character height: PV: 14.9 mm, SV: 7.1 mm

Multi SP *

Up to eight set points (SP0 to SP7) can be saved and selected using the event inputs, key operations, or serial communications.

Bank switching

None

Other functions

Adaptive control, automatic filter adjustment, water-cooling output adjustment, indication data (power ON time monitor, ambient temperature monitor, and control output ON/OFF count monitors), parameter masking, operation after power ON, manual output, heating/cooling control, loop burnout alarm, SP ramp, other alarm functions, heater burnout (HB) alarm (including SSR failure (HS) alarm), 40% AT, 100% AT, MV limiter, input digital filter, robust tuning, PV input shift, run/stop, protection functions, extraction of square root, MV change rate limit, logic operations, temperature status display, simple programming, moving average of input value, and display brightness setting

Ambient operating temperature

-10 to 55°C (with no condensation or icing), For 3-year warranty: -10 to 50°C with standard mounting (with no condensation or icing)

Ambient operating humidity

25% to 85%

Storage temperature

-25 to 65°C (with no condensation or icing)

Altitude

2,000 m max.

Recommended fuse

T2A, 250 VAC, time-lag, low-breaking capacity

Installation environment

Overvoltage category II, Pollution Degree 2 (EN/IEC/UL 61010-1)