KEYENCE LR-ZB240CB M18 threaded mount w/ M12 connector type, 240 mm

Type

Distance based laser sensor

Shape

M18 Threaded mount

Output

Bipolar (NPN+PNP)

Cable connection

M12 connector, 4-pin

Detectable distance

25 to 240 mm (215 to 0)^*1

Standard detectable deviation

25 to 170 mm: 9 mm
170 to 240 mm: 25 mm

Display resolution

1 to 3 (1 to 3 mm)

Spot diameter

Approx. 2.4 × 1.2 mm at 240 mm

Response time

1.5 ms / 10 ms / 50 ms selectable

Light source

Type

Red laser (660 nm)

Laser class

Class 1 laser product 
(IEC60825-1, FDA (CDRH) Part1040.10^*2)

Function

Indicator

3-digit 7-segment display (red),
output indicator (yellow),
DATUM indicator (orange),
1 spot indicator (green)

Timer

OFF/ON delay/OFF delay/One-shot

Rating

Power voltage

10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS

Power consumption

450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)

Specifications

Control output

NPN+PNP Open collector, 
Applied voltage 30 VDC or less, Control current 100 mA or less, 
Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mA

Protection circuit

Protection against reverse power connection, output overcurrent, output surge, reverse output connection

Output operation

Light-ON / Dark-ON selectable

External input

None

Environmental resistance

Enclosure rating

IP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB^*3, Diversey^*3

Insulation resistance

20 MΩ or more (500 VDC)

Ambient light

Incandescent lamp: 2,000 lux or less
Sunlight: 4,000 lux or less^*4

Ambient temperature

-10 to +50 °C

Storage temperature

-25 to +75 °C (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Withstand voltage

1,000 VAC, 50/60 Hz, 1 min

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Shock resistance

1,000 m/s², 6 times in each of the X, Y, and Z directions

Material

Case: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, 
Packing/Connector ring: FKM, Nut: SUS316L, Lock washer: SUS304

Accessories

Instruction Manual,
Certification/Identification label (FDA)

Weight

Approx. 75 g

^*1 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed.
^*2 The laser classification for FDA (CDRH) is implemented based on IEC60825-1 in accordance with the requirements of Laser Notice No.50.
^*3 Have passed resistance tests with cleaning agents from multiple manufactures.
^*4 When the response time is 10 ms