KEYENCE LR-ZH490CB M18 threaded mount w/ M12 connector type, 490 mm

Type

U.C.D. Function
Distance based laser sensor

Shape

M18 Threaded mount

Output

NPN/PNP selectable

Cable connection

M12 connector, 4-pin

Detectable distance

25 to 490 mm (465 to 0)^*2

Standard detectable deviation

25 to 170 mm: 9 mm
170 to 290 mm: 25 mm
290 to 390 mm: 40 mm
390 to 490 mm: 50 mm

Display resolution

1 to 5 (1 to 5 mm)

Spot diameter

Approx. ø3 mm

Response time

1.5 ms / 10 ms / 50 ms selectable

Light source

Type

Red laser (660 nm)

Laser class

Class 2 laser product (IEC60825-1)
Class II Laser product (FDA (CDRH) Part1040.10)

Function

Indicator

3-digit 7-segment display (white),
output indicator (yellow),
DATUM indicator (orange),
1 spot indicator (green)

Timer

OFF/ON delay/OFF delay/One-shot

Rating

Power voltage

10 to 30 VDC, including 10% ripple (P-P), Class 2 or LPS

Power consumption

450 mW or less (18 mA or less at 24 V, 34 mA or less at 12 V)

Specifications

Control output

NPN open collector/PNP Open collector selectable, 
Applied voltage 30 VDC or less, Control current 100 mA or less, 
Residual voltage 1.2 V or less at 10 mA or less, 2 V or less at 10 to 100 mA

Protection circuit

Protection against reverse power connection, output overcurrent, output surge, reverse output connection

Output operation

Light-ON / Dark-ON selectable

External input

Input time calibration: 35 ms or more ON, 35 ms or more OFF
Laser emission stop: 2 ms or more ON, 20 ms or more OFF
Short-circuit current NPN: 1 mA or less/PNP: 2 mA or less

Environmental resistance

Enclosure rating

IP68 (IEC60529), IP69K (DIN40050-9), NEMA 4X, 6P, 13 (NEMA250), ECOLAB^*3, Diversey^*3

Insulation resistance

20 MΩ or more (500 VDC)

Ambient light

Incandescent lamp: 10,000 lux or less
Sunlight: 20,000 lux or less at 240 mm^*4
Incandescent lamp: 2,000 lux or less
Sunlight: 4,000 lux or less at 490 mm^*4

Ambient temperature

-10 to +50 °C (No freezing)

Storage temperature

-25 to +75 °C (No freezing)

Relative humidity

35 to 85 % RH (No condensation)

Withstand voltage

1,000 VAC, 50/60 Hz, 1 min

Vibration resistance

10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions

Shock resistance

1,000 m/s², 6 times in each of the X, Y, and Z directions

Material

Case: SUS316L, Display: PES, Lens cover: PMMA with scratch-resistant coating, 
Packing/Connector ring: FKM, Nut: SUS316L, Lock washer: SUS304

Accessories

Instruction Manual, 
FDA warning/certification/identification label, 
Laser warning/explanation labels

Weight

Approx. 75 g

^*1 IO-Link specification v.1.1/COM2 (38.4 kbps) is supported. (LR-ZH490CB : Only when PNP output is selected.) You can download a setup file from the KEYENCE website. If using the product in an environment in which downloading files over the internet is not possible, contact your nearest KEYENCE office.
^*2 Display readings can be used as a guide for the detecting distance. When the setting value is tuned, the readout shifts. When the value exceeds "-99", "-FF" is displayed.
^*3 Have passed resistance tests with cleaning agents from multiple manufactures.
^*4 When the response time is 10 ms