KEYENCE PZ-G42EP Square Reflective M12 Connector Type with Cable, PNP
KEYENCE
PZ-G42EP
Square Reflective M12 Connector Type with Cable, PNP
Specifications:
Model | PZ-G42EP | |
Type | Diffuse Reflective | |
Shape | Rectangular | |
Output | PNP | |
Cable connection | M12 pigtail | |
Detecting distance | 300 mm | |
Spot diameter | ― | |
Light source | Red LED | |
Sensitivity adjustment | 1-turn trimmer (230°) | |
Response time | 500 µs | |
Operation mode | LIGHT-ON/DARK-ON (switch-selectable) | |
Indicators (LED) | Output: Orange LED, | |
Control output | Open collector output, 30 V max., 100 mA max., Residual voltage: 1 V max. | |
Protection circuit | Reversed polarity, overcurrent protection, surge absorber | |
Interference suppression | Up to 2 units | |
Tightening torque | Rectangular models (Mounting hole part): 0.5 N m max. | |
Rating | Power voltage | 10 to 30 VDC, including Ripple (P-P) 10 % |
Current consumption | 34 mA or less | |
Environmental resistance | Enclosure rating | IEC: IP67/NEMA: 4A, 6, 12/DIN: IP69K |
Ambient light | Incandescent lamp: 5,000 lux max., Sunlight: 20,000 lux max. | |
Ambient temperature | -20 to +55 °C (No freezing) | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Shock resistance | 1,000 m/s2, 6 times in each of the X, Y, and Z directions | |
Material | Housing, M18 nut(threaded models only) | Glass-fibre reinforced PBT |
Lens cover | Polyarylate (PAR) | |
Trimmer | Glass-fibre reinforced polyamide (PA) | |
Case connection | Screw: Nickel-plated iron and zinc, packing: nitrile butadiene rubber (NBR) | |
Cable (cable models only) | Polyvinyl chloride (PVC) | |
Accessories | Instruction manual | |
Weight | Rectangular M12 pigtail quick disconnect model: Approx. 30 g | |
*1 Cable sold separately for connector models |