Type
| L-CAT EVO II 4330 | L-CAT EVO II 4430 | L-CAT EVO II 4540 |
Drive Method | 5-phase stepping motor with X,Y axes |
Operation Range | X, Y, Z Axes (mm) | 300x300x60 | 400x300x60 | 500x400x60 |
R Axis | 340 ° |
Weight (kg) | 50 | 52 | 55 |
Portable Weight (kg) | 3 |
Axis Speed | X, Y Axes | 750 mm/sec. |
Z Axis | 150 mm/sec. |
R Axis | 360°/sec. |
Repeatability | ±0.02mm |
Teaching Method | Remote Teaching (JOG) |
Manual Data Input (MDI) |
SYS-I/O | Input :16 Output:10 |
Free I/O | Input: 16 Output:16 |
External Interface | Ethernet, RS232C |
Program Capacity | 100 programs |
Memory Capacity | 100,000 point |
Timer | TIM: 0.1~99.9(m/sec.) |
Iron Up/Down | CY: ON/OFF |
Setting Temperature | 0~500℃ |
Soldering Conditions | 198 conditions |
Soldering Step | 21 step |
Solder Feeding Speed | 1.0~50.0 mm/sec |
Solder Feeding Amount Resolution | 0.01 mm |
Solder Diameter | φ0.4~φ1.6mm |
Heater Capacity | 130W (Option: 200W available) |
Nitrogen Generator | Standard equipment to robot inside, with digital flow meter |
Display Language | English, Chinese, Korean, Japanese |
Power Source | AC94~260V (Single phase) |
Power Consumption | 330 VA max (including heater) |
Air Supply | 0.4~0.5 MPa (dry & clean air) |
Dimensions (WxDxH, in mm) | 520x995x714 | 620x995x714 | 720x1100x714 |
