MALCOM SOLDER-PASTE WETTING TESTER （SP-2）

Load Sensor

Principle

Electro - balance sensor

Measurement range

10.00gf～－5.00gf

Measurement accuracy *

± (10mgf + 1 digit)

Resolution

Less than 900 mgf: 0.001 gf More than 900 mgf: 0.005 gf

Temp. Sensor

Measurement range

0～300℃

Measurement accuracy

±3℃

Heater unit

Temp. of heater unit

Room temperature ～ 300℃

O2 Concentration

Simple closed heater unit with nipple for N2 purge test

Temp. profile setting

1. Preheat temp.
2. Preheat time
3. The rate of temp. rise 3℃ /sec. (standard)
4. Maximum temp.
5. Maximum temp. time

Melting point

Preset solder paste melting point

Table movement

Automatic: operated by PC
Manual: operated by Up/Down switch (selectable 3 steps speed)

Digital output

RS-232C cable (Malcom format)

Air supply

Original air pressure: 0.2～0.5 Mpa (Approx. 2～5 kgf / cm2)

Adjustment air: 0.2 Mpa (Approx. 2kgf / cm2 ) 

Power supply

AC100V 50 / 60Hz 700W

Weight

Approx. 20kg