ZHIXIN ZX1376 series DC bias current source and bridge bias all-in-one machine
ZHIXIN
ZX1376 series
DC bias current source and bridge bias all-in-one machine
| Technical parameters | |||
| Model | ZX1376 | ZX1376X | |
| Show | 4.3" LCD | 4.3" LCD | |
| Operation | Physical button + foot control switch | Physical button + foot control switch | |
| Support measurement frequency | 0Hz-2MHz | ||
| Current range | 0-25A | 0-25A | |
| Current | Measure range | 0mA-1.000A, 1.000A-5.000A, 5.0A-25A | |
| Step by step | 0.25mA, 1.25mA, 6.25mA | ||
| Scanning adjustment time | 4ms-3600s | 10ms-3600s | |
| Maximum output voltage | 11V (11V voltage can be output under all current conditions!!!) | ||
| Maximum allowable DC resistance | Rmax=Vmax/I (Ω) (Please refer to the user manual for the calculation of Rmax) | ||
| Maximum allowable inductance | Lmax=Vmax/(di/dt) (mH) (Please refer to the user manual for the calculation of Lmax) | ||
| Measurement method | Automatic | ||
| Start and stop control mode | START/STOP physical buttons, 4 kinds of foot control, bus | ||
| Maximum current time for continuous loading | Conservative 2-3h, uninterrupted output | ||
| Function | Instrument fault self-test; 99 sets of custom file management; dual progress bar instructions; Chinese and English bilingual; slave soft switch; real-time operation; SCPI instruction set; simple dual-display calculator, etc. | ||
| Interface | SlaverLink, RS232C, UsbHost, USB Device, Handler, GPIB (optional) | ||
| Power supply requirements | Voltage: 100~120 Vac or 198~242 Vac | ||
| Frequency: 46-64 Hz, power greater than 50 VA | |||
| Temperature and humidity | 0℃~40℃, relative humidity ≤75% | ||
| Volume (WxHxD) | 430mmx178mmx465mm | ||
| Weight (net weight) | 19Kg | ||
| Technical parameters | ||
| Model | Function parameters of ZX1376X bridge | |
| Test frequency | 50Hz~200kHz, More than 12,000 frequency points | |
| Test parameters | C, L, X, B, R, G, D, Q, ESR, Rp, θ, |Z|,|Y|,P | |
| Test level | 10mV-2Vrms | |
| Basic accuracy | 0.05% accuracy table shall prevail | |
| Test speed | Fast: 50 times per second, medium speed 20 times per second, slow speed 6 times per second (Frequency above 1kHz) | |
| Show show Fan Encirclement | |Z|, R, X | 0.01 mΩ ~ 99.9999MΩ | 
| |Y|, G, B | 0.00001μS~99.9999S | |
| C | 0.00001pF~9.99999F | |
| D | 0.00001~9.99999 | |
| DCR | 0.01mΩ~99.9999MΩ | |
| L | 0.00001μH~99999.9H | |
| Q | 0.01~99999.9 | |
| θ(RAD) | -3.14159~3.14159 | |
| θ(DEG) | -179.999 °~179.999° | |
| Δ% | -99.999%~99.999% | |
| Signal source output resistance | 30Ω, 100Ω, 10/CC | |
| Measurement method | Automatic, maintain | |
| Trigger mode | Internal, manual, automatic, external, bus | |
| Calibration function | Open/short circuit, full frequency zero, point frequency zero | |
| Equivalent circuit | Series, parallel connection | |
| Comparator | Three-level sorting, BIN0~BIN2 | |
| PASS, HI, LOW (PASS/FAIL LED displ | ||
 
                     
                                                                         
                     