OMRON XW2R (General-purpose devices) Connector-Terminal Block Conversion Units for General-purpose Device
OMRON
XW2R (General-purpose devices)
Connector-Terminal Block Conversion Units for General-purpose Device
Specifications:
With power supply terminals
e-CON Type
Rated current | Power supply terminal block: 2 A, | |
Rated voltage | 24VDC | |
Insuration resistance | 100MΩ min. (at 500VDC) | |
Dielectric strength | 500VAC for 1 min (leakage current: 1 mA max.) | |
Ambient operating temperature | 0 to 55°C | |
Applicable | Applicable wire | AWG 24 to 14 (ferrules), |
Stripped length | AWG28-16: 8 to 10 mm |
* This is the applicable range for the power supply terminal block. For the applicable wire sizes for I/O Connectors (e-CON).
Input Device Connectors: XN2 e-CON Connectors
Rated current | 3 A/pin (with AWG20 wires), 2 A/pin (with AWG22 wires), |
Rated voltage | 32 VDC |
Contact resistance | 30 mΩ max. (at 20 mV, 100 mA max.) |
Insuration resistance | 103 MΩ min. (at 500VDC) |
Dielectric strength | 1,000 VAC for 60 sec (leakage current: 1 mA max.) |
Insertion durability | 50 times |
Ambient operating temperature | -30 to 75°C * |
Applicable wires | Stranded wire 0.08mm2 (AWG28) to 0.5mm2 (AWG20) |
* The operating temperature range is restricted by the maximum operating temperature of the cable.
Without power supply terminals
Phillips screw
Rated current | 1 A | |
Rated voltage | 125 VAC, 24 VDC | |
Insuration resistance | 100 MΩ min. (at 500 VDC) | |
Dielectric strength | 500 VAC for 1 min (leakage current: 1 mA max.) | |
Ambient operating temperature | 0 to 55°C | |
Applicable wires | Applicable wire sizes | AWG 22 to 16 (round or forked crimp terminals) |
Stripped length | 9 mm | |
Tightening | 0.5 Nm |
Slotted screw (rise up)
Rated current | 1 A | |
Rated voltage | 125 VAC, 24 VDC | |
Insuration resistance | 100 MΩ min. (at 500 VDC) | |
Dielectric strength | 500 VAC for 1 min (leakage current: 1 mA max.) | |
Ambient operating temperature | 0 to 55°C | |
Applicable wires | Applicable wire sizes | AWG 22 to 16 (ferrules) |
Stripped length | 7 mm | |
Tightening | 0.5 to 0.6 N·m |