OMRON VT-S730 PCB Inspection System

2024-08-13 13:50:53 admin

OMRON

VT-S730

PCB Inspection System

Specifications:

Hardware configuration

Model		S730	S730-H
Dimensions		1100 (W) × 1470 (D) × 1500 (H) mm
Weight		Approx. 800 kg
Power supply	Voltage	200 - 240 VAC (single phase), voltage fluctuation range ±10%
	Normal rated power	2.8 kVA	2.4 kVA
Line height		900 ±20 mm
Air supply pressure		0.3 - 0.6 MPa
Operating temperature range		10 - 35°C
Operating humidity range		35 - 80%RH (Non-condensing)
Image signal input block	Imaging system	4M pixel camera	12M pixel camera
	Inspection principle	3D reconstruction through color highlight and phase shift technology
	Image resolution	15 μm
	FOV	30.00 × 30.72 mm	61.44 × 46.08 mm

Functional specifications

Model	S730	S730-H
Supported PCB size	50 (W) × 50 (D) - 510 (W) × 460 (D) mm
Thickness	0.4 - 4 mm
Clearance	Above: 40 mm; Below: 40 mm
Height measurement range	25 mm
Inspection item	Component height, lift, tilt, missing/wrong component, wrong polarity, flipped component, OCR inspection, 2D code, component offset (X/Y/rotation), fillet (height/length, end joint width, wetting angle, side joint length), exposed land, foreign material, land error, lead offset, lead posture, lead presence, solder ball, solder bridge